ESCO EverSharp lip system features a true continuous-edge design that protects the plate lip, eliminating the need to rebuild the lip during multiple bucket-rebuild cycles. The bases contain fully stabilized bearing areas for the shrouds, transferring load pressures from the plate lip and onto the hardened cast base. The system's slim-profile shrouds increase penetration. The locking system of the ESCO EverSharp is positioned to eliminate the top leg, in a low-wear area, and extra metal is added across the lower leg, in the high-wear zone. Secondary corner wear shrouds are available to maintain the continuous edge profile when the primary corner shrouds wear out. All components have dedicated lifting eyes for safer, convenient installation. A one-piece, hammerless pin allows maintenance personnel to replace all the components at once. Using an off-the-shelf pry bar, pins are quickly removed from the top side of the lip. The lip system's heavy-duty cast corners absorb high stresses to provide structural integrity to the bucket. Weld-on bases provide a reliable bearing surface for the shroud and pin, eliminating the need to rebuild fit areas. ESCO