The 95,000-lb CobraTrack 1300 has a 5048 horizontal-shaft impactor with a three-bar rotor that the company says produces 400 tph. The feed opening is 45½ x 40½ in. The three 4-in.-thick impact bars are reversible and secured by a wedge locking system. Gravity-hung primary and secondary breaker plates feature screw adjustment with hydraulic assist. The 4,600-lb primary breaker plate features a cast-manganese mono-block design. The secondary breaker plate has 3-in. interchangeable AR liners. The CobraTrack is powered by a 400-hp diesel engine with operating controls at ground level. The vibrating grizzly feeder is 42 in. x 14 ft with a hydraulic, variable speed drive. The 24-in.-wide side grizzly cross conveyor has a 5-ft 9-in. discharge height and belt scraper. It also is equipped with a magnetic separator mounted over the front discharge. It has a 9-ft 4-in. track base. The CobraTrack can reach ½ mph. A remote control manipulates the machine tracking and feeder controls.

Cedarapids, (319) 399-4871