NEW PRODUCTS

Power Units

Article Tools

Perkins' 1100 Series open power units have cross-flow heads, open top deck blocks on the four-cylinder engine and full-authority electronic control on the six-cylinder engine. Models 1104C-44, 1104C-44T, 1104C-44TA and 1106-E60TA have between 86 and 174 gross hp, 82 hp and 160 net hp and 2,400 and 2,500 rpm. An optional 12/24-volt and pusher or puller fans are available, as well as a balanced variant. Perkins, (309) 578-6006
Circle 180 or Visit freeproductinfo.net/rp

Tailgate

East Manufacturing's smooth-sided dump trailers are available with smooth-walled tailgates. They are lighter than the sheet-and-post designs. Tailgates are built from double-wall aluminum extrusions, robotically-welded together. Each 2-in. thick extrusion has two internal ribs connecting the inner and outer skins. It also features an over-slung hinge that offers more bearing surface. East Manufacturing, (888) 405-3278
Circle 181 or Visit freeproductinfo.net/rp

Dust Collector

Farr Air Pollution Control's Big Round Filter is a reverse air dust collector that features a domed tank head roof made of ⅜-in.-thick metal. The domed roof is combined with an all-welded housing of 7- and 10-gauge metal that the company says withstands 25-in. w.g. pressure. The system is self-contained and requires no plant compressed air. A rotating arm cleans the system. It has a perforated inner cone. A ladder and service platform provide access to the clean air plenum. Farr Air Pollution Control, (800) 479-6801
Circle 182 or Visit freeproductinfo.net/rp

Belt Scale

The Siemens Energy & Automation Millitronics' MCS belt scale has triple-beam stainless steel load cells. It handles load cells from 50 to 100 lb and belts as wide as 42 in. A 250-lb load cell is available for mobile crusher applications. On mobile crushers, it is compatible with the Siemens Millitronics BW 100 integrator in an anti-vibration steel enclosure and TASS trailing speed arm sensor. The package includes a calibration weight and calibration weight arm. Siemens Energy and Automation, (215) 646-7400
Circle 183 or Visit freeproductinfo.net/rp

Data Loggers

Dickson's display temperature and humidity data loggers have alarms and SD flash memory cards. The loggers are available in model SM300 for temperature, model SM320 for remote temperature, model SM325 for dual remote temperature, model TM320 for temperature and humidity, and model TM325 for remote temperature and humidity. All loggers feature high and low alarms, minimum and maximum displays and USB connectivity. Users can make decisions based on minimum and maximum readings on a digital display or wait for the alarm mode before downloading all data. One-second sampling, delayed-start capability, data storage of 32,000 points also is available. Loggers have a margin of error of 1.8° F for temperature and 2% for humidity, Dickson says. Dickson, (800) 323-2448
Circle 184 or Visit freeproductinfo.net/rp

Modular Screens

W.S. Tyler's Ty-Deck polyurethane screen panel is available in a 1- × 4-ft pin and sleeve, modular design. The company says the panels have 10% more area than the traditional pin and sleeve 1- × 1-ft panels. Ty-Deck is available in square or slotted openings ranging from 0.008 in. to 2.5 in. Thickness ranges from 30 mm to 80 mm. W.S. Tyler, (800) 321-6188
Circle 185 or Visit freeproductinfo.net/rp

White LED Dome Lamps

Grote Industries' SuperNova LED dome lamps are retrofitted for truck cabs, trailers and bodies. The company says, lamps last the life of the vehicle. Components are water and corrosion resistant and protected by a potting compound. Dome lamps operate in temperatures as low as 40° C. Surface-mount cab dome lamps are constructed with an extruded aluminum-base assembly and an internal light dispersion lens made from high-impact acrylic. LED trailer dome lamps are recessed into the trailer ceiling. The 4-in.-diameter metal flange and grommet-mounted LED dome lamps average an output of 84 lumens. The rectangular LED trailer dome lamp is water resistant and made with a one-piece steel base. A removable high-impact acrylic lens is sealed to the lamp body with PVC foam. Grote Industries, (330) 666-3450
Circle 186 or Visit freeproductinfo.net/rp

Motorized Pulley

The Emerson MX20 motorized pulley is available in 10 to 30 hp. It comes in face widths ranging from 37 to 63 in. The enclosed pulley drive system has NEMA motors with 10 carburized and ground gearing. The sealing system includes a hermetic cable connector, fluroelastomer radial lip shaft seals and external seal guards. The Emerson MXP does not have recommended oil changes, external pillow block style bearings or belt drives. Pulleys are available in 8-, 12-, 16- and 20-in. Emerson Power Transmission, (606) 564-2369
Circle 187 or Visit freeproductinfo.net/rp

Circuit Breaker

Cole Hersee Co. says its circuit breaker and fuse blocks with grounding plates protect wiring, equipment and subsystems. They are available as 6-, 8- or 10-gang. Each accepts plug-in fuses and other circuit breakers. The circuit breaker and fuse blocks are protected by recessed fuse contacts. They are available for 12- or 24-volt DC applications. The blocks have plated steel blade terminals and 10 to 32 stud terminals. The units also are available without grounding plates. Cole Hersee Co., (617) 268-2100
Circle 188 or Visit freeproductinfo.net/rp

Respirator

Mine Safety Appliances' Advantage 3000 full-face respirator has a face-seal based on an Ultra Elite face piece. It is available with pre-adjustable straps or European-designed Advantage harnesses. The respirator meets NIOSH and EN standards. All filters are interchangeable. Mine Safety Appliances, (800) 672-2222
Circle 189 or Visit freeproductinfo.net/rp

Gear Coupling

The Lovejoy/Sier-Bath Farr gear coupling is designed for underground and surface belt conveyors. The gear drive can be mounted directly to the conveyor. The low-speed shaft bolts directly onto the conveyor shaft by a coupling. The coupling is 4140 alloy steel and consists of a male and female piloted-coupling assembled with Grade-8 bolts and Grade-C torque nuts. There are 10 sizes of the gear coupling that range from 94,500 in.-lb to 7.7 million in.-lb and up to a 15-in. design. Lovejoy, (630) 852-0500
Circle 190 or Visit freeproductinfo.net/rp

Power Generators

Terex has 13 power generators with outputs ranging from 16 to 325 kW. Three-phase outputs are available in 208, 220, 240, 416, 440, 480 AC volts. The units have single-phase outputs of 120, 127, 139, 240, 254 and 277 AC volts. The generators are powered by Perkins, John Deere or Isuzu diesel engines. Fuel tanks are incorporated in the structural base of the unit. They also have an automatic start controller. Generators operate at 68 dbA and feature single- or double-wall spill containment tanks. Control panels have black backgrounds and analog gauges that indicate water temperature, oil pressure, engine hours, fuel level and battery voltage. Power output is monitored in volts, amps and frequency. An engine control module monitors engine conditions and shuts the motor down immediately during fault conditions. J1939 protocol models feature Murphy iGuard controllers and Powerview gauges. Non-J1939 protocol models incorporate DynaGen controllers. Terex, www.terex.com
Circle 191 or Visit freeproductinfo.net/rp

Interactive Products

Resources