Rock Products Logo
Now Incorporating Aggregates Manager
 

 

 
 

ANNUAL READER SURVEY

Help Rock Products understand the state of the industry and the needs of our readers by completing our annual Reader Survey.

It only takes 10 minutes and your answers will help guide us as we plan our content for the upcoming years.

Start Survey

 

MSHA Issues New Serious Accident Alert


The Mine Safety and Health Administration (MSHA) reported that on March 24, two miners were using a man-lift to charge (load) blast holes with non-electric blasting caps, 8-grain boosters and ammonium nitrate fuel oil (ANFO) blasting agent.

During the loading process, one of the non-electric shock-tubes became wedged on the man-lift basket. As the man-lift operator progressed across the face loading the blast holes, the wedged shock-tube stretched and broke (snapped) causing a pre-detonation of a blast hole. As a result of the pre-detonation, one miner received minor injuries and the other miner serious injuries.

MSHA recommends the following best practices to avoid this type of accident:

  • Explosive materials should be kept organized and under the direct observation of the blaster during loading operations so personnel and equipment does not inadvertently come in contact with them.
  • The manufacturer’s recommendations regarding maximum loading on the tubing are to be followed (e.g. maximum primer weight lowered into hole by the tubing).
  • Shock tubing is not to be subjected to undue tension by pulling, in hole to hole situations.
  • Situations in which shock tubing is subjected to impact by falling rock, equipment etc. is to be avoided.
  • Excess shock tubing can be coiled, but should not be cut off.
  • Shock l tube downlines should be tied to pegs visible to vehicle operators.
  • The blast crew should carefully consider the blast design and plan the loading sequence to avoid having to move over or too near to loaded holes.