ASGCO Manufacturing has introduced several accessories, including a Modular Impact Bed system and return-idler guard. The MIB system — the newest in its line of load zone support systems — is designed to provide impact protection for conveyor belts while helping to control spilling in the conveyor-loading zone. The system consists of 18-inch-long x multiple-belt-width units that are closely fitted to form the bed length needed. ASGCO says its impact bars allow the tight segment fit, eliminating material from getting caught between the bars. They are designed for easy change-out and maintenance by simply loosening two bolts per segment to remove the center portion of the bed, from either side of the conveyor. Installation involves bolting the cross-frame into the conveyor, sliding the center section into center of cross-frame, sliding two wing frames into each side, and bolting or pinning in place.

All impact beds have two 3-inch channel-cross support members for resistance against impact. Multiple 18-inch beds can be assembled to make 36-, 54-, 72-inch and larger units. Wings are fabricated to match any troughing angle. The beds also are available with steel or impact rolls as an option or with a center module designed to accept rollers. ASGCO's lightweight Safe-Guard return-idler guard is designed to prevent injuries from pinch points and to catch the return idler if it should fall. Installation of Safe-Guard on a conveyor belt return idler helps protect workers from the hazard of contacting the exposed idler. The UHMW slotted cage is designed to prevent material build-up and for easy cleanup. Removing just two stainless-steel pins provides full access to the roller for ease of replacement and maintenance. The Safe-Guard's universal mounting brackets are made from powder-coated A-36 steel and can be used on CEMA B, C, D and E series idlers up to 7 inches in diameter. They are fully adjustable for a wide range of idler sizes and belt widths up to 96 inches. ASGCO